Snad každý již někdy slyšel o přístroji jménem nivelační přítroj nivelák. Ve své podstatě jde o jednoduchého pomocníka, který umožňuje stanovit rovinu. Vývoj v této oblasti dokládá, že všechny přístroje se zdokonalují a zjednodušují pro jejich uživatele. Všechny přítroje značky SOUTH jsou osazeny kvalitním kompenzátorem, který zaručuje dorovnání obrazu do roviny. Stačí ustavit nivelační přístroj do přibližné roviny a už je nivelační přístroj připraven k použití. NL32 jako všechny nivelační přístroje SOUTH jsou plně kovové přístroje, tedy velmi odolné a seřiditelné nivelační přístroje. Všechny přístroje jsou osazeny skleněnými čočkami, mimochodem pokud někde uslyšíte, že je nějaký nivelační přístroj osazen umělohmotnými, pak se jedná o podivnost. Skleněné čočky jsou mnohem levnější při výrobě a mnohem odolnější v terénu. Jediným rozdílem, které přístroje nabízí je jejich ochraný faktor, podobně jako je to u brýlí. Nivelační přístroje SOUTH patří mezi nejkvalitnější nivelační přístroje z Číny, kde se mimochodem vyrábí asi 99% klasických nivelačních přístrojů. Sestava NL32 je profesionální kompletní nivelační set se skleněnou optikou. Spolehlivý nivelační přístroj vhodný na stavbu většího rozsahu. Zvětšení 32x, přesnost 1,5 mm/km oboustrané nivelace. Nivelační přístroj, stativ i nivelační lať jsou z kvalitní výroby společnosti SOUTH.

Hlavní výhody jsou: vše v jedné sadě a od jednoho výrobce, nivelační přístroj s kvalitní skleněnou optikou, která neoslepne, vodotěsný nivelační přístroj, robustní hliníkový stativ s rovnou hlavou a rychlosvěrami. Možnost opravitelnosti a kalibrace, vyrobeno dle normy ISO 9001, rychlý záruční i pozáruční servis. Dodávaná sada obsahuje nivelační přístroj NL32, hliníkový stativ s rychlosvěrami a 5 m nivelační teleskopickou hliníkovou lať s cm/mm dělením, pouzdro na nivelační lať, libelu a náhradní zarážku k přístroji, návod v českém jazyce.

Firma SOUTH uvádí na trh novou řadu kompenzátorových nivelačních přístrojů NL-XX, které jsou vhodné pro stavebníky, strojaře i geodety. Kvalitní dalekohled se zvětšením 32x poskytuje vynikající a vysoce kontrastní obraz. Přístroj je vybaven vestavěným stabilizátorem zajišťujícím vysokou spolehlivost měření. I přesto, že jsou přístroje NL-XX cenově velmi přijatelné, patří stále mezi přístroje zajišťující vysokou úroveň přesnosti, spolehlivosti a výkonnosti. Tedy vlastnosti, které zákazník od profesionálních výrobků očekává. Dalekohled přístroje poskytuje velmi ostrý, jasný a vzpřímený obraz. Průměr objektivu je 34 až 38mm. Přístroj má velmi krátkou délku zaostření 0,5m, což je vynikající zejména při práci v uzavřených, nebo stísněných prostorách. Rovněž vzduchem tlumený kompenzátor s rozsahem 15? umožňuje velice přesné urovnání záměrné přímky do vodorovné roviny s přesností 0.6. Standardní vybavení dále obsahuje rychlé, snadno ovladatelné a pohodlné dvourychlostní zaostřování, horizontální kruh s gradovým dělením a jemnou horizontální ustanovku bez funkce hrubé ustanovky.

Objednejte si předvedení, které vás nebude stát nic a získáte nový rozměr vašich vědomostí, co vše máte chtít od nivelačních přístrojů nové generace.

Pro přímý vstup k dalším informacím o produktu klikněte ZDE
english
přihlášení Přihlášení
Registrace
Staňte se našimi
fanoušky
Volejte ZDARMA
800 123 228
3D skenery

3D skener GeoSLAM ZEB-REVO

Kód: 125446
zeb-revo

Informujte se na cenu zboží

?
Expedice - 7 dní
Výrobce
Katalogové číslo 125446
Hlavní technické parametry
Dotaz na prodejce

Se 3D skenerem GeoSlam ZEB-REVO  zachytíte realitu rychle, snadno a přesně. Skenování tak, jak ho neznáte. Řešení od firmy GeoSLAM přináší nebývalou efektivitu při zachování jednoduché obsluhy.


 

 

The ZEB-REVO Solution

 

“Go-anywhere” 3D mobile mapping technology. Handheld, lightweight and easy to use scanners that allow you to rapidly build highly accurate 3D models within minutes, while on the move. The complete solution that allows you to start mapping the world around you today.

 

The global leader in ‘go-anywhere’ 3D mobile mapping technology

 

GeoSLAM.com

 

2

 

“GeoSLAM’s solutions are changing the way we survey buildings – we can now create building plans 10 times faster than we used to with total stations or traditional survey equipment.”

 

Morten Thoft, COWI

 

The demand for up to date, accurate 3D models is greater than ever before. Traditionally, creating these models was solely the domain of professional surveyors, but now engineers and geospatial professionals such as facilities managers and architects are all seeking ways to quickly and accurately create 3D models. These professionals all need access to user-friendly technology that is easy to install and use, but is robust and reliable enough to do the job quickly and accurately. For those working in difficult to access spaces where there is no GNSS coverage such as inside buildings, and in caves, mines and forests, the demands on the technology are even greater. And for many, mapping the space is time critical. They need versatile tools that enable them to survey an indoor, underground or difficult to access space and within minutes build a highly accurate 3D model.

 

Introducing our unique, end-to-end-technology - the ZEB-REVO solution:

  • Lightweight, handheld laser scanners which are highly mobile, simple to operate and can be used by anyone. Our versatile technology is adaptable to any environment, especially complex and enclosed spaces, without the need for GNSS. The 100Hz surveying system includes scanner, data logger and accessories and enables you to accurately scan and capture data, while on the move.
  1. User-friendly desktop software which turns data into real-time 3D information, delivering rapid and accurate results within minutes. With unlimited point cloud processing software and local registration, you can check your survey data instantly on site and export files in a range of industry standard formats.
  • Support & maintenance options depending on what your business needs including helpdesk, issue analysis and resolution, product enhancement and release management. You can select from Bronze, Silver & Gold packages.

 

 

Data capture with our products is as simple as ‘walk and scan’. Map a 3-storey building in just 30 minutes to an accuracy level of ±15mm or scan, view and export up to 10,000 m2 (105,000 sq. ft.) in under 1 hour. Join our customers as they measure building plans 10 times faster than traditional tools, deliver BIM models earlier than expected and experience project cost savings of up to two thirds. And with our solution, customers can expand their range and scope of services by taking on projects that would otherwise have proved too difficult or time consuming using traditional survey techniques.

 

3

 

GeoSLAM

 

ZEB-REVO Solution

 

Our customers are more profitable, more efficient and more competitive with our 3D mobile mapping solutions. Here are the benefits you can experience by choosing the ZEB-REVO solution:

 

“Go-anywhere” 3D mobile mapping – our versatile technology is adaptable to any environment in all industries, especially complex and enclosed spaces, without the need for GNSS. Flexible mounts and deployment options means the ZEB-REVO can be handheld, drone or robot mounted or even attached to a pole or cable. Weighing only 3.5kg, the handheld device can be used to quickly scan multi-level environments, and with an IP64 rating, it can withstand hazardous and harsh environments.

 

Rapid scanning time – within minutes anyone can be operating the ZEB-REVO, and our intelligent software (which uses the most established and robust SLAM mapping algorithm in the industry) can map a 3-storey building in just 30 minutes to an accuracy level of ±15mm, or map a 10,000 m2 (105,000 sq. ft.) depot in under an hour. Walk through your target survey environment to record more than 43,000 measurement pts/sec, and from scan to full 3D BIM model in under an hour!

 

Saving you time and money – you can capture and model complex data up to 10 times faster, enabling you to successfully complete projects in minimum time with little or no disruption at the project site. With proven ability to scan faster than traditional surveys or static terrestrial laser scanning, you can reduce scanning time, in many cases by half. Customers often find that the ZEB-REVO is highly complementary to their existing scanning hardware, as the combination allows indoor handheld scanning to take place at the same time as the outdoor scanning, saving project time and money.

 

Core Industries

 

Surveying

 

Engineering

 

Forestry Facilities & Asset Management Mining

 

Image showing merged indoor and outdoor dataset 4

“With the ZEB-REVO scanner you can easily walk a 10,000-square foot building with a second floor in about 15 minutes, process the data collected in about the same time, export to Autodesk ReCap and into Autodesk Revit and/or Autodesk AutoCAD in less than an hours’ time.”

 

Eric Fines, Duncan-Parnell

 

How it Works

 

MapWith a 360° vertical field and 30m range, simply move through your environment whilst capturing more than 43,000 measurement points a second. Automatic SLAM (Simultaneous Localisation and Mapping) processing software aligns the data without the need for external control to produce a highly accurate 3D point cloud and synchronised imagery of the area surveyed. If needed, a full set of user definable parameters are also available to optimise the results for different types of environments.

 

ViewOnce mapped, the synchronised imagery and point cloud data acquired can be viewed in the GeoSLAM Desktop software in both 2D and 3D. For larger projects, multiple datasets can also be merged. Enterprise-wide viewing tools allow the data to be shared throughout an organisation enabling more accurate feature identification and measurement in 3rd party software.

 

ExportResults are available in all major industry standard formats and users can select from a variety of export options and configurations to enable greater integration with 3rd party post processing software.5

 

Local

 

Processing Power

 

With just a laptop and a dongle, ZEB-REVO data can be seamlessly downloaded, processed and viewed within minutes of capture – wherever you are. The software, based upon our industry-leading SLAM algorithm, is used to automatically register data captured from the ZEB-REVO to produce fully-aligned 3D point clouds. As SLAM requires no GNSS input the software can be used to dynamically process mapping data from both indoor and outdoor environments, while on the move. Accurate ground referencing can be achieved either by scanning known survey points or by integration with existing georeferenced point clouds.

 

GeoSLAM Desktop has the following advantages:

  • Value - Unlimited point cloud processing
  • Simplicity - Simple ‘drag and drop’ automatic registration
  • Convenience - Instant point cloud creation lets you check your survey before you leave the site
  • Security – Local high-speed processing means no need to upload your data online.

Added ExtrasYou can purchase additional accessories as required, such as the ZEB-CAM, a bolt-on video camera that adds contextual imagery to your scan data. It integrates seamlessly with the ZEB-REVO scanner and allows visual images to be viewed alongside the 3D data in the Viewer. Optical flow technology allows accurate synchronisation of acquired imagery andpoint cloud data, making feature extraction simpler than ever.

 

Included as standard with the ZEB-REVO solution are the following accessories: main 1.5m cable, USB data cable, 8GB memory stick, 12v battery charger and backpack. Other optional add-ons include:

 

  1. heavy duty transport case
  2. mounting plate
  3. backpack frame
  4. cradle (for vertical deployment)
  5. extendable pole
  6. spherical targets.

 

6

 

There

 

When You Need Us

 

GeoSLAM is committed to offering world class global support and service. We want our customers to avoid downtime and get the best from their solution. We have therefore designed our support packages to give you full peace of mind and the ability to fix your maintenance costs upfront to avoid unplanned expenditure. By joining our premium support customers, you don’t only maintain your current solution but also have your say, through our beta program, in our future solutions to help us maintain our position as the market leader in SLAM mobile mapping.

All new ZEB-REVO solutions are sold with either bronze, silver, or gold support and maintenance for the first 12 months. You can purchase extended support packages for longer than 12 months at point of purchase or support contracts can be renewed or upgraded annually. We offer a 12-month warranty as standard, with extended warranty plans available. We also offer a range of training options from onsite product training to online remote training, all carried out by our team of experts.

Item

Bronze

Silver

Gold

Hardware

Option to extend warranty at point of purchase

Transferable ownership

Option to extend warranty at end of current warranty period

Annual hardware clean, service, and calibration

Firmware updates

Free loan equipment during service and repair (subject to availability)

Software

Online dataset flagging and processing support (48 hours turnaround)

Online dataset flagging and processing support (24 hours turnaround)

Online dataset flagging and processing support (12 hours turnaround)

Direct GeoSLAM technical support (Mon to Friday 9am to 5pm UK time)

Direct GeoSLAM technical support (Mon to Friday 7am to 7pm UK time)

Direct GeoSLAM technical support (24/7)

Minor Software updates

Major Software updates

Free annual tailored web-ex training session

Access to GeoSLAM BETA testing program